Home Fogging system

Home dry fogging system.  May support reduction of mold, mycotoxins, bacteria, endotoxins and viruses.

Just like humans, homes have a microbiome.  A dysbiotic home microbiome full of mold, mycotoxins, bacteria, endotoxins and viruses.   

Here are the 5 keys to a healthy home microbiome:

• Repair any water leaks and remove any moldy wood, drywall or other materials, then spray area with Concrobium.
• Get a dehumidifier and keep the humidity between 35-40%
• Make sure you home has good ventilation.
• Get an filter with >10lb of activated charcoal to absorb mycotoxins.
• Test for low 10um dust particles with a particle counter.
• If 10um >2x outside values, fog with a non-toxic solution as needed.

If you are dealing with mold hypersensitivities…

• Turn WIFI off at night
• Remove houseplants
• Only use a top fill washing machine
• Fog your dishwasher

Dry fogging

Most foggers create wet fog. This is fog with droplets larger than 5 microns. These larger droplets do not travel as far in a room and cannot penetrate small cracks and crevices effectively. Instead, they leave a damp film on surfaces, which can promote mold and bacterial growth. If you can see the fog, it is considered wet fog, not dry fog. Our system creates only a true dry fog.

Cold Fogging

Some fogging units use heat to vaporize solutions into a dry fog. While this can produce dry fog, the heat may damage the non-toxic fogging solutions we recommend. Our unit generates a true dry cold fog without using heat.

Fogging Solutions

Our foggers are compatible with acidic solutions such as Sanidate 5.0 and HOCl, oxidizers including ClO₂ and H₂O₂, and particulate-based solutions like home probiotics. The unit is designed with inert plastic components and a venturi port instead of a metal nozzle, allowing it to safely handle acidic solutions when used correctly.

Probiotics

Homes have their own microbiome. By adding Bacillimet to water, you can fog beneficial Bacillus probiotics throughout your environment.

Remote Ventilation

Our fogger includes an outlet that can power an inexpensive window exhaust fan. The system is programmed to activate the fan only after the fogging and disinfection cycles are complete. This allows the room to ventilate automatically after treatment. Simply start the unit, and it will fog and ventilate the space without additional intervention.

Protocol

When using 8% H₂O₂, place the fogger in the center of the room and use a fan on a low setting to help distribute the fog. Remove houseplants, pets, and aquariums (or turn off aquarium air pumps and seal them with plastic wrap). Follow the instructions displayed on the unit. No additional ventilation is required.

Room Size

With its 2-liter reservoir, the unit can effectively fog areas up to 900 square feet.